St 35.8 DIN 17175, 1.0305 Seamless Pipe
2018년 12월 29일
DIN-EN Pipe and Tube Material Grade, Standard
2018년 12월 29일
DIN-EN Stainless Pipe and Tube Standard
STEELMAX Steel Story
DIN-EN 10216-5 : This European Standard specifies the technical delivery
conditions in two test categories for seamless tubes of circular cross section
made of austenitic(including creep resisting steel) and austenitic-ferritic
stainless steel which are intented for pressure and corrosion resisting
purposes at room temperature, at low temperatures or at elevated temperatures.
DIN-EN 10217-7 : This European Standard specifies the technical delivery
conditions in two test categories for welded tubes of circular cross section
made of austenitic and austenitic-ferritic stainless steel which are
intented for pressure and corrosion resisting purposes at room
temperature, at low temperatures or at elevated temperatures.
※ Creep
Slow permanent deformation in a metallic specimen
produced by a relatively small steady force, below the
elastic limit, acting for a long period of time.
※ Creep resistance
a property of resistance against a phenomenon in which
strain in the lapse of time under a fixed stress at a high
temperature called high temperature creep.
※ Creep strength
Stress to cause specified strain in specified loading period of
time at constant temperature.
For example, the stress causing strain 1%, 0.1%, 0.01% in 1000h.
※ Austenitic-Ferritic Stainless Steels
Stainless steels where austenitic structure exists together to ferritic
structure at a ordinary temperature.
It is called duplex stainless steel.
※ Austenitic Stainless Steels
Stainless steel with austenitic structure even at a
ordinary temperature
SUS304 is representative.
| EN Standard | Material No. | Material grade | Test class/Remark | JIS |
| EN10216-5 | X5CrNi18-10 | 1.4301 | TC1, TC2 | SUS304 |
| X2CrNi19-10 | 1.4306 | TC1, TC2 | SUS304L | |
| X5CrNiMo17-12-2 | 1.4401 | TC1, TC2 | SUS316 | |
| X2CrNiMo17-12-2 | 1.4404 | TC1, TC2 | SUS316L | |
| X2CrNiMoN22-5-3 | 1.4462 | TC2, Duplex | S31803 | |
| X1NiCrMoCu25-20-5 | 1.4539 | TC2, Superaustenitic | SUS890L,904L | |
| X6CrNiTi18-10 | 1.4541 | TC2 | SUS321 | |
| X6CrNiMoTi17-12-2 | 1.4571 | TC2 | SUS316Ti | |
| X6CrNiNb18-10 | 1.4550 | TC1 | SUS347 | |
| EN10217-7 | X5CrNi18-10 | 1.4301 | TC1 | SUS304 |
| X2CrNi18-9 | 1.4307 | TC1 | SUS304L | |
| X5CrNiMo17-12-2 | 1.4401 | TC1, TC2 | SUS316 | |
| X2CrNiMo17-12-2 | 1.4404 | TC1, TC2 | SUS316L | |
| X2CrNiMoN22-5-3 | 1.4462 | TC1, Duplex | S31803 | |
| X1NiCrMoCu25-20-5 | 1.4539 | TC1, Superaustenitic | SUS890L,904L | |
| X6CrNiTi18-10 | 4.4541 | TC2 | SUS321 | |
| X6CrNiMoTi17-12-2 | 1.4571 | TC2 | SUS316Ti |
DIN-EN Stainless Pipe and Tube Standard
스틸맥스는 연구소 수준의
깊이 있는 철강에 대한 이해를 바탕으로,
Carbon Steel, Special Steel, Stainless, Functional,
Ni-Alloy, Cu-, Al-, Co-, Ti-, Mg-, Metal, Forging.
Plate, Sections, H-Beam, Round, Angle, Channel,
Rail, Crane Rail, Flat, I-Beam, Pipe & Tube, SMLS.
ASTM, ASME, AISI, API, SAE, AMS, KS, JIS, CSA,
DIN-EN, NORSOK, DNV, ABS, GL, LR, KR, NK, RS.
국가규격, 국제단체 규격, 국제협회 규격부터
Mill Maker Standards까지 공급하고 있습니다.
Citius, Altius, Fortius,
더 빠르게, 더 높이, 더 강하게가 요구되는 올림픽처럼
공급이 어려운 철강재 공급에는
진정한 전문 선수를 필요로 합니다.
